Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time they are susceptible to a range of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's crucial to act immediately if you notice your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and test it for fitting. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform a test fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do can not only cause degrading of the structure of your home but also undermine your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame here is damaged or not present.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how serious the issue is, old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in a breeze. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is essentially a simple process, but it's easier with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular way or by poor installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to offer suggestions.

It is also crucial to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and replacing windows near me other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again due to wear and tear could become misaligned. This will cause a gap to form where the sash joins the frame. This can be easily repaired by giving them a good cleaning, but when they're beyond repair, it may be necessary to get them realigned or replaced. The interlock may also become unbalanced. This is located on the hinge side and might require to be cleaned. In some instances, it may be necessary to replace these.

These seals are susceptible to wear and tear replacement glass for window near me or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

Lastly, windows fitters near me one of the most effective methods to reduce draughts is by using a draught excluder. These are typically made of fabric filled with some kind of filler. They can be placed on the windowsill on top. They can keep your home warm by blocking cold air.

With a little regular maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach a point where it door and window companies near me is more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.